مرجـع دانـش پارس

نوع فایل:PDF

تعداد صفحات :14

سال انتشار : 1395

چکیده

System identification is dealing with dedicated experimental data to find a compact and accurate mathematical model of a dynamic system. The main goal of this paper is to present the system identification technique to yield a good transfer function of the actual plant. The steps start with hardware setup, data collection, model estimation, and eventually model validation. Based on input and output data of the system, best fit criterion, and correlation analysis of the residual is utilized to construct the sufficient model to represent the system. Identification of Single Input Single Output (SISO) transfer function is considered. The transfer function is parameterized as black box model. Resistance, Inductance, Capacitance (RLC) electrical circuit is taken into account as a black box model. PIC 16F877A microcontroller is used to generate 7-bit Pseudo Random Binary Sequence (PRBS) signal. PRBS signal is utilized as an input to be injected to the system. It is observed that the experiment model supports the simulation model

واژگان کلیدی

PRBS, ACF, CCF, Black Box Model